Compact instantaneous water heater from Wijas, reliable technology from the EU. Ideal for use with a toilet shower. Heats the water directly to just above body temperature. Minimal power consumption by mounting at the point of use. Minimalist flat design that won't mar your toilet or bathroom.

• Solid Design. KIWA/CE/KEMA approved
• Mini design
• Perfect water temperature (heats 25 degrees Celsius above pipe temperature)
• Cold in , Warm out
• 2 x M 1/2" connection.
• Can be combined with any type of toilet shower
• Simple & solid wall mounting

Technical specifications: Required voltage: 230Vac/50 Hz- 1 group of 16A; Power consumption: 15.2A-3500 Watts; Max water pressure: 0.65mPa; Shifts at: 1.1 l/min; Dimensions: 149 x 133 x 75 mm (very small); Connection: 1/2 inch; Easy to connect with flexible hose; Enclosure: IP24; Energy efficient; Instant hot water (within 10 seconds); No flue gas outlet; No pilot light; No maintenance; No carbon monoxide hazard; Always standby; No chance of legionella; No water loss; Made in EU; With CE and VDE approval; Energy label: A Complete with installation manual; Ideal for use together with a toilet shower. At 15 degrees Celsius in comes out: 1,5l/min-48 degrees C; 2 l/min -40 degrees C; 2.5l/min-35 degrees.

The instantaneous water heater "3500 Perfect pressure-tight" is intended for direct hot water supply to the toilet shower. Thanks to the special design of the heating element, the flow heater maintains a constant pressure of 0.65 MPa. Assembly is by means of flexible hoses with rubber gaskets are possible on almost any fixture. In the flameproof instantaneous water heaters, an electronic control has been placed which has contributed significantly to a reduction of the dimensions of these devices. This allows the device to be mounted quickly and easily, for example in an undercounter unit. - Protection class: IP 24 - Dimensions: 149 x 133 x 75 mm - Application: washbasins - Rated current: 15.2 A - Switch-on water volume: 1.1 l/min - Connection: 1/2"

Technical specifications:

• Required voltage: 230Vac/50 Hz- 1 group of 16A;
• Power consumption: 15.2A-3500 Watts;
• Max water pressure: 0.65mPa;
• Shifts at: 1.1 l/min;
• Dimensions: 149 x 133 x 75 mm (very small);
• Connection: 3/8 inch;
• Easy to connect with flexible hose;
• Enclosure: IP24;
• Energy efficient;
• Instant hot water (within 10 seconds);
• No flue gas outlet;
• No pilot light;
• No maintenance;
• No carbon monoxide hazard;
• Always standby;
• No chance of legionella;
• No water loss;
• Made in EU;
• With CE and VDE approval;
• Mounting: Vertical only
• Energy label: A
• Complete with mounting instructions;
• Ideal in combination with a toilet shower!
• At 15 degrees Celsius in comes out: 1,5l/min-48 degrees C; 2 l/min -40 degrees C; 2.5l/min-35 degrees.